CLAVINET.COM MOLDED CLAVINET HAMMER TIP SET $49.99 a set

The Clavinet produces sound by the mechanical action of hammer tips striking down onto a set of strings when the keys are depressed. The hammers were made of an orange substance known as "Urepan", a European rubber compound made by Bayer in the 1970's. Unfortunately, time, heat and moisture caused these tips to deteriorate, making them soft and mushy. Even in the most well-cared for Clavinets, the deterioration of the hammer tips caused the strings to notch a "groove" into them, causing the keys to stick and make an unpleasant "popping sound".

In 1999, Clavinet.Com "Came to the rescue" and developed the first ever molded replacement clavinet hammer tip. Our hammer tip set is made of Buna Nitrile, an industry-standard rubber compound known for its durability and strength. They were created using advanced injection molding techniques and feature a one degree taper for smooth insertion, making do-it-yourself replacement a cinch. No bending or cutting is required and no tools are needed. They were designed from original Hohner specifications and molded into a proper "T" shape, making them the most authentic O.E.M. reproductions available today. The Hammer tips come in sets of 62 (60 + 2 spares) and come with a 30 day MONEY BACK GUARANTEE.

CLAVINET.COM CLAVINET STRING SET $69.99 a set

In less than one years time, air and moisture exposure can cause clavinet strings to oxidize and corrode. During that period, strings that are under tension lose their vibrational qualities, compromising tone and sustain and causing them to produce a false set of harmonics, making them difficult to tune, even to themselves. Clavinet owners have been depending on these dull, brittle and nearly 25-40 year old corroded wires to produce that funky sound for over two or three decades!. Our high-quality, custom manufactured strings are matched to original specifications and feature the same excellence you have come to expect from our products.

Clavinet.Com Ultra Preamp $149.99 ea. CONVERT YOUR CLAVINET II or Model C or to a D6!! 

Introducing the single best upgrade for clavinet owners everywhere - THE CLAVINET.COM ULTRA-PREAMP!

• Improved design is quieter as it incorporates a "ground plane" on one side of the preamp, which shields the entire board internally, thus eliminating the need for an external "shield box".

• A power regulator and filter circuit has been added to the preamp, allowing the use of external AC power supplies without adding additional noise!

• The "Stevie Wonder" mod (old preamp upgrade kit) is built into the new preamp!

• Drop-in replacement board uses the same mounting holes as the original PCB. No case modifications necessary.

• INCLUDES low-noise, audiophile-grade components (Wima capacitors, metalized resistors, custom wound choke filters).

• Each unit comes PRE-ASSEMBLED, requiring a minimal amount of soldering.

• CONVERT YOUR CLAVINET II or Model C or to a D6!!
  Optional On-board DIP switches allow "stealth access" to the (4) D6 tone switches without having to drill holes for external switches in your Clavinet! *SEE NOTE*
  

• All kits come with full detailed installation instructions.

Note: The Clavinet.Com Ultra-Preamp does NOT include the Barrel Transformer, which can be re-used from your existing Clavinet D6 PCB. Clavinet II or C owners MUST purchase a Barrel Transformer!

Note #2: NOT FOR USE WITH CLAVINET D6 PREAMP/SWITCH ASSEMBLES (SUCH AS THE UNIT PICTURE HERE) or Clavinet E7/Duo.

Barrel Transformer For Clavinet II or C Owners (BEYER) $125.00 ea.

CLAVINET HUMBUCKING PICKUPS $199.99 each / $349.99 a set

Several years ago, in an interview for N.Y. Musician magazine, I was asked on what people should look out for when purchasing a clavinet. I immediately responded "Cracked Pickups!". Original Hohner Clavinet Pickups are housed in plastic and sealed in an epoxy, this makes them A. Easily breakable and B. Impossible to repair. Being that original replacements no longer exist, many clavinets with cracked pickups were sadly discarded or used for parts. We simply could not tolerate that, so we commissioned a top U.S. pickup maker to manufacture new clavinet pickups - with a twist. One of the biggest complaints of Clavinet owners is the NOISE and HUM the instrument picks up, because it uses SINGLE COIL pickups and is mostly unshielded. Fender Guitars share the same problem, and a solution was invented many years ago - HumBUCKING pickups. "Humbuckers" as they are called, are actually two single coils in one pickup. The two coils cancel each others hum out, making the pickup quieter than traditional "Single Coils". We decided to manufacture our replacement pickups using the Humbucker design, and we know you will be pleased. The pickups were designed to imitate the originals, and they sound great! One year warranty. 30 Day Money Back Guarantee. 
Clavinet Humbucking Pickup Set (Upper and Lower)
Upper Clavinet Pickup ONLY 
Lower Clavinet Pickup ONLY

Clavinet Tuner Panel Cover $59.95 ea.

Missing your tuner panel cover? No problem! Clavinet.Com's authentic reproduction tuner panel covers fit the D6 and E7. (They will fit the C and Duo Models, but will require drilling additional holes). Aluminum, black finish, no lettering. Felt gaskets. Includes (2) Thumbscrews for mounting!

View Shopping Cart / Checkout